EP233B

The CAN signals sent from control unit N93 (Central gateway control unit) are incomplete.


Possible cause:

- N93 (Central gateway control unit)
Affected functions:

- CAN Communication
- Automatic transmission Function

-------------------------------------------------

Test 1: Remedial action in the event of implausible signals from control unit N93 (Central gateway control unit)

1. Remedial action in the event of implausible signals from control unit N93 (Central gateway control unit)
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module N15/3 (ETC [EGS] control unit) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N93 (Central gateway control unit)
Possible measures

- Read out fault memory of control unit N93 (Central gateway control unit).
- Process displayed fault codes in control module N93 (Central gateway control unit).
End of test