EP2333
The CAN signals sent from control unit N15/5 (Electronic selector lever module control unit) are incomplete.
Possible cause:
- A80 (Intelligent servo module for DIRECT SELECT)
Affected functions:
- CAN Communication
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action in the event of implausible signals from control unit N15/5 (Electronic selector lever module control unit)
Test 2: Remedial action in the event of implausible signals from control unit A80 (Intelligent servo module for DIRECT SELECT)
1. Remedial action in the event of implausible signals from control unit N15/5 (Electronic selector lever module control unit)
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING
- This is not a function error of control module N15/3 (ETC [EGS] control unit) and does not justify replacement.
Possible cause for the entry of this event code
- Operational fault of component N15/5 (Electronic selector lever module control unit)
Possible measures
- Read out fault memory of control unit N15/5 (Electronic selector lever module control unit).
- Process displayed fault codes in control module N15/5 (Electronic selector lever module control unit).
End of test
2. Remedial action in the event of implausible signals from control unit A80 (Intelligent servo module for DIRECT SELECT)
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING
- This is not a function error of control module N15/3 (ETC [EGS] control unit) and does not justify replacement.
Possible cause for the entry of this event code
- Operational fault of component A80 (Intelligent servo module for DIRECT SELECT)
Possible measures
- Read out fault memory of control unit A80 (Intelligent servo module for DIRECT SELECT).
- Process displayed fault codes in control module A80 (Intelligent servo module for DIRECT SELECT).
End of test