Side Flap In/Out Limit Switch, Purpose

Side Flap In/Out Limit Switch, Purpose

One single-pole normally open switch and one single-pole normally closed switch (for positions "folded in and out") transmit a ground signal to the UVS control module (N52), as soon as the side flap is folded in or out.

The left limit switch side flap folded in/out (S126/1) and right folded in/out (S127/1) are connected in series.

NOTE: if the side flap is not in the end position, a ground signal (input open) is not sent to the UVS control module (N52).