AH01.30-P-1000-04VA Information on Applying Sealant to A Cylinder Head Gasket

AH01.30-P-1000-04VA Information on applying sealant to a cylinder head gasket

If porous points are visible on the cylinder heads or on the rump of the engine in the area of the sealing surface of the cylinder head gasket, apply sealant at these points.

Repair information:
The sealant must only be applied only with a bead of 2.0 mm ± 0.5 mm.

The sealing compound must be applied within 10 min.

The sealing compound bead must not be spread.