COMAND(R) System - Unable to Enter New Destination
Date: September 12, 2003Order No.: P-B-82.85/288
Supersedes:
Group: 82
SUBJECT:
Model 203.061/064/065/081/084/264/281/284/740/747
Model 208.365/370/374/465/470/474
Model 209.365/375/376/465/475/476
Model 210.065/070/074/082/083/265/282
Model 215.373/374/375/376/378
Model 220.170/173/174/175/176/178/183/184
Model 230.475
Model Year 2000-2004 with COMAND
COMAND System Entering Navigation Destination Not Possible with Navigation
CD-ROM DCA6 or DCA11 Release 7/02
If you receive customer reports in the above models of the COMAND system having the following symptom, do not replace any parts. The condition is caused by a faulty CD-ROM image on DCA6, perform the following to resolve.
Condition:
After changing Navigation CD-ROM from DCA6 Ohio Valley USA to DCA11 Canada (or vice versa) it is not possible to enter a new City, Street or Center. The Navigation System just will return to the main menu.
Remedy:
Select destination from memory or last destination and start route guidance. Cancel route guidance.
Now entering a new City, Street or Center is possible.
This will be resolved with CD-ROM release of 2003 (expected in October 2003).