AN82.64-P-0001-03PC Retrofit Power Supply Wiring Harness

AN82.64-P-0001-03PC Retrofit Power Supply Wiring Harness
- Models 203.0, 203.2, 203.7 up to model refinement with COMAND operating and display system Code 352a.

The voltage supply wiring harness for the CD player with changer is tied back behind the radio or COMAND.






1 Use a knife to cut out the perforation in the glove compartment (see arrow).






2 Route the voltage supply wiring harness for the CD player with changer (1) as per the figure behind the instrument panel carrier through the breakthrough in the glove compartment.