AR09.50-P-8843-01T Attach Air Recirculation Flap Actuator

AR09.50-P-8843-01T Attach Air Recirculation Flap Actuator

Supercharger:

1 Clean sealing surfaces.
2 Insert new seal.
3 Attach air recirculation flap actuator (M16/7) loosely on the charge air cooler. Do not tighten Torx bolts (1).
The air recirculation flap actuator (M16/7) must be movable in order to allow trouble free connection of the charge air cooler and compressor.







4 Connect charge air cooler and compressor together and fix together with bolts.
Do not use sealant since the charge air cooler and compressor will be separated again.

5 Tighten front torx bolt (2) on air recirculation flap actuator (M16/7).
6 Remove bolts and carefully disconnect charge air cooler and compressor.
7 Tighten all Torx bolts on air recirculation flap actuator (M16/7) [Nm].