Evaporative Emission Control Canister: Service and Repair

Remove/install activated charcoal canister





DANGER:
- Risk of explosion if ignition takes place, risk of poisoning caused by inhaling fuel vapors or swallowing fuel, as well as risk of injury to skin and eyes exposed to fuel.
- No fire, sparks, naked flames or smoking.
- Pour fuels only into suitable and appropriately marked containers.
- Wear protective clothing when handling fuel.

1 Remove rear right fender liner
2 Detach lines (A, D) at activated charcoal canister (77)

NOTE: Installation: Observe "connection diagram" given below.

3 Unlatch activated charcoal canister (77) toward top
4 Install in the reverse order.

Connection diagram of evaporative emission control system

Shown On Engine 112 in Model 210:

Shown On Engine 113 in Model 210: