Standing Lamp Actuation, Function

Standing Lamp Actuation, Function






Operational sequence
1 Exterior lamp switch (S1) is in parking lamp position and signals
"Parking lamp ON" to the left SAM control module (N10/10).
2 The left SAM control module actuates the parking lamp in the left headlamp and simultaneously transmits the signal
"Parking lamp ON" to the
- instrument cluster (A1),
- right SAM control module (N10/11), and
- rear SAM control module (N10/8) via the data bus.

3 The right SAM control module (N10/11) actuates the parking lamp in the right headlamp unit.
4 The rear SAM control module (N10/8) actuates the
- taillamps in the left and right taillamps and
- the left and right license plate lamps (E19/1 and E19/2).

NOTE: Actuating the instrument cluster (A1) with the "Parking lights ON" signal triggers an acoustic warning signal if the electronic key has been removed and the driver's door is open.