GF82.10-P-3000R Standing Light Actuation, Function

GF82.10-P-3000R Standing Light Actuation, Function

Component Identification:

Function requirements:
^ Circuit 30

Function sequence
If the rotary light switch (S1) is turned to the "Standing lamp" position, the driver-side SAM control unit (N10/10) sends the signal "Standing lamp On" via CAN-B to the following control units:
^ Passenger-side SAM control unit (N10/11)
^ Rear SAM control unit (N10/8)

Front standing lamp actuation
The driver-side SAM control unit (N10/10) actuates the following lamps:
^ Left standing and parking lamp (E1e3)
^ Left front side-marker lamp (United States of America) (E6/1)

The passenger-side SAM control unit (N10/11) actuates the following lamps:
^ Right standing and parking lamp (E2e3)
^ Right front side-marker lamp (United States of America) (E6/2)

Rear standing lamp actuation

The rear SAM control unit (N10/8) actuates the following lamps:
^ Left stop lamp, taillamp and parking lamp (E3e9)
^ Left side-marker lamp (United States of America) (E3e6)
^ Right stop lamp, taillamp and parking lamp (E4e9)
^ Right side-marker lamp (United States of America) (E4e6)
^ left license plate lamp (E19/1)
^ Right license plate lamp (E19/2)

If the "standing lamp On" signal with the transmitter key removed is still active, then a chime is emitted over the instrument cluster when the driver door is opened.