GF80.61-P-4102-02R Keyless Go Control Module, Purpose

GF80.61-P-4102-02R Keyless Go Control Module, Purpose
- with CODE (889) Keyless Go


The keyless go control module (N69/5) has the following purposes:
^ Control of left door keyless go lifting magnets (L12); right door keyless go lifting magnets (L12/2).
^ Control of keyless go inductive antennas:
- Rear bumper keyless go antenna (A2/31)
- Left trunk keyless go antenna (A2/35)
- Right trunk keyless go antenna (A2/36)
- Left door keyless go antenna (A2/38)
- Right door keyless go antenna (A2/40)
- Center console keyless go antenna (A2/60)

^ Locating keyless go transmitter card (A8/2) in or outside of vehicle via antenna system.
^ Reading in keyless go start/stop button (S2/3).
^ Reading in left door pull contact microswitch (S47s1), right door pull contact microswitch (S48s1).
^ Reading in left door pressure contact (S47s2), right door pressure contact (S48s2).
^ Reading in left door capacitive sensor (S47b1); right door capacitive sensor (S48b1).
^ Reading in trunk lid keyless go button (S62/21).
^ Reading in stop lamp switch (S9/1).