Terminating/Ending Call, Function

Terminating/Ending Call, Function






Function

Terminating call
If the voice control system switch is actuated during a telephone call, the voice control system voice recognition is deactivated and the existing connection disconnected. The voice recognition is located in the voice control system control module (A35/11). This is possible at any desired point during the call. If the user is in the Input mode, the user can say the voice command 'Terminate' into the hands-free system microphone causing the voice recognition to be deactivated by the system. This is also possible at any other desired point in the Input mode.

Ending call
A call is terminated with the telephone keys on the steering wheel and not by actuating the VCS switch (S93/2).