Keyless Go System(R) - System Initialization

Date: November 19, 2002

Order No.: P-B-80.61/17

Supersedes:

Group: 80

SUBJECT:
Model 211, Model Year 2003

Keyless Go System

After replacement of either door module or disconnecting the Keyless Go module, the system must be initialized; otherwise the system may operate incorrectly or have limited range. One or both of the door modules, along with other modules on the Keyless Go CAN, will not show actual values or ECU version, only dashed lines will be displayed when accessed by SDS.

To initialize the system, go to

- "EIS - Electronic Ignition switch / KG - Keyless Go"

- "Actuations"

- "Keyless Go system check".