AN82.71-P-0001-01T Retrofitting Microphone Wiring Harness

AN82.71-P-0001-01T Retrofitting Microphone Wiring Harness

1 On the driver's side stick the self-adhesive Velcro strip (2) onto the rain/light sensor covering as per the magnified section.
2 Attach the microphone (B25/1) to the Velcro strip (2).







3 Route the line (1) from the microphone (B25/1) to the overhead control panel opening as per the Figure.
4 Clip in the covering for the rain/light sensor.
5 Contact the 2-pin coupling of the microphone (B25/1) and 2-pin plug of the wiring harness for the taximeter mirror and microphone.
6 Tie back excess length of wiring harness and fix in position under the headliner through the opening of the overhead control panel.