GF82.95-P-2000QM TELE AID Switch-On/Switch-Off Characteristics, Function

GF82.95-P-2000QM TELE AID Switch-on/switch-off Characteristics, Function
- with CODE (359) TELE AID emergency call system

Function requirements
Each telematics service must be authorized separately. In the event of a defect or without proper authorization, an error message is displayed in the multifunction display (A1p13) of the instrument cluster (A1) and in the display of the COMAND operating, display and control unit (A40/3). The system is operational as soon as circuit 30 is active.

Self-test
With active circuit 15R, the emergency call system control unit (N123/4) executes a self-test (approx. 3.5 s). If the test is successful, the system is operational.

Ending an emergency call
A call is normally ended by the emergency call headquarters.

Establishing an emergency call connection is canceled after the emergency call system control unit (N123/4) has attempted to dial 5 times without success.