DTR Control Unit, Design

DTR Control Unit, Design

ENGINES 112, 113, 137, 275, 613, 628 in MODEL 220 up to 31.5.04 with CODE (219a) Distronic (DTR)
ENGINES 113, 137, 275 in MODEL 215 up to 31.5.04 with CODE (219a) Distronic (DTR)
ENGINES 112, 113, 275 in MODEL 230 up to 31.5.04 with CODE (219a) Distronic (DTR)
ENGINES 112, 113, 271, 646, 647, 648 in MODEL 211 up to 31.5.04 with CODE (219a) Distronic (DTR)
ENGINES 112, 113, 271, 612 in MODEL 209 up to 31.5.04 with CODE (219a) Distronic (DTR)
ENGINE 285 in MODEL 240 with CODE (219a) Distronic (DTR)




1 Connector for radar sensor
Pin 1 Screening
Pin 2 Serial interface low signal
Pin 4 Voltage supply sensor, negative
Pin 6 Serial interface high signal
Pin 8 Voltage supply sensor, positive
2 Vehicle-side plug
Pin 1 CAN engine high signal
Pin 2 Diagnostic data link connector
Pin 4 Circuit 87
Pin 5 CAN Motor Low-Signal
Pin 8 Ground
3 Coaxial connector
Internal conductor- data IF signal
External conductor- screening IF signal
N63/1 DTR control unit

Ventilated metal housing with two 8-pin connectors and one coaxial connector for the RF cable from the radar sensor. Voltage supply secured from terminal 87.