AR18.40-P-5111A Remove/Install Oil Level Sensor

Remove/Install Oil Level Sensor

Shown On Engine 112:

DANGER:
- Risk of death, Death may result if vehicle slips or topples from the lifting platform.
- Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

1 Evacuate engine oil, drain
2 Remove lower part of oil pan (1)
3 Unplug connector (3) at oil level sensor
4 Unscrew bolts of oil level sensor (2)
5 Remove oil level switch (S43)
6 Install in the reverse order.