AR67.10-P-1200M Remove/Install Windshield Molding

AR67.10-P-1200M Remove/Install Windshield Molding

Illustrated On Model 220:

Removal
1 Remove paneling on outside of A-pillar

NOTE: Remove paneling on outside of A-pillar on one side only

2 Lift molding (1) at side with plastic wedge and pull out of insert clips (2), (5 each)
- See "Special Tools" below.

Installation
3 Position molding (1) on insert clips (2), (5 each), align at side and press in
4 Install paneling on outside of A-pillar.

Special Tools

Long Wedge P/N # 115 589 03 59 00: