AR27.60-P-0900I Remove/Install Floor Shift

Remove/install floor shift
- with transmission 722.6







Remove/Install

1 Disconnect shift rod from intermediate lever
2 Remove center console
3 Remove air duct for center rear compartment air nozzle

NOTE: Not vehicles with rear air conditioning code 582

4 Unscrew hexagon socket bolts (40)
5 Disconnect couplings at electronic selector lever module control module (N15/5)
6 Unclip ignition lock control cable from ignition lock control cable connection fitting (1)
7 Remove electronic selector lever module control module (N15/5)
8 Install in the reverse order

NOTE: After installing the floor shift, erase fault code with Star Diagnosis