Negative: Service and Repair

AR54.10-P-0003I Disconnect/Connect Ground Cable at Battery

Shown On Model 220:

1 Fold back trunk cover
2 Connect quiescent current retention unit
3 Loosen nut (2) and disconnect ground lead (1) from battery
4 Connect ground lead

NOTE: Perform work described below only if quiescent current retention unit was not connected

5 Code radio

NOTE: See Owner's Manual

6 Set time on instrument cluster
7 Activate steering angle sensor
8 Synchronize power windows

NOTE: See Owner's Manual

9 Synchronize sliding/pop-up roof

NOTE: See Owner's Manual

10 Synchronize jacket tube module