AZ86.61-P-0001-01M Retrofitting And Connecting Refrigerator Wiring Harness

AZ86.61-P-0001-01M Retrofitting And Connecting Refrigerator Wiring Harness

Component Identification:

1. Route wiring harness (1) of refrigeration compartment (rear armrest) along existing cables to below right rear seat and fix in place with cable strap.







2. Route branch of refrigeration compartment plug connection (rear armrest) (5) through cable lead through at rear backrest into the luggage compartment and behind the bulkhead (9) as far as the cutout for the refrigeration compartment, and fix in place with felt.







3. Route wiring harness (1) of refrigeration compartment (rear armrest) below right rear seat and fix in place.
4. Connect branch of ground cable to ground of right rear seat (W17).







5. Insert grey fuse holder (A) into connection position F4f76 of rear fuse box (F4).







6. Fit a fuse (76) 15 A into grey fuse holder (A) in rear fuse box (F4).







7. Work out rear wall trim (14) with cutout for through-loading facility to height of recess in bulkhead (see arrow of enlarged detail) for the contact mount (6) in accordance with dimensions stated in enlarged detail.







8. Run wiring harness (1) through the cutout in the rear wall trim and insert plug connection of refrigeration compartment (5) into contact mount (6).