AP83.00-P-8381MA Replacing Heater/Ventilation Dust Filter

AP83.00-P-8381MA Replacing Heater/Ventilation Dust Filter








1. Glove Compartment
2. Locking Slide
3. Cap
4. A/C Housing
5. Dust Filter



Remove/Install

1. Remove glove compartment (1)

2. Unlock locking slide (2) upwards and remove cover (3) from A/C housing (4) in the direction of the arrow

3. Pull both dust filters (5) out of the A/C housing (4)

NOTE:
Dust filters (5) must not be cleaned but housing (4) should always be replaced

In order to prevent contamination of the vehicle interior, hold dust filters (5) horizontal when removing,

4. Install in the reverse order