Sunroof / Moonroof Weatherstrip: Service and Repair

AR77.20-P-1300M Remove/Install Seal For Sliding/Pop-Up Roof Panel
- with CODE (412b) Electric sliding/pop-up roof
- with CODE (414a) Electric glass sliding/pop-up roof







Removal
1 Remove wind deflector
2 Loosen screws (6)
3 Unscrew seal (1) from rails (2, 3, 4, 5)

CAUTION: Carefully pull seal (1) out of rail (2) because barbs are present on the rail

Installation
4 Push rail (2) up until the spacers (7) are against the roof and tighten screws (6)
5 Press seal (1) into rails (3, 4, 5) at the points marked with arrows with the grooves pointing up.

NOTE: Use lubricant

6 Install wind deflector.