Glove Compartment Lock Cylinder: Service and Repair

AR68.10-P-1250M Remove/Install Lock Cylinder on Glove Compartment Lid

Illustrated On Model 220:

Removal, installation
1 Remove glove compartment
2 Unscrew mounting screws for lock cylinder (1)

NOTE: Lock cylinder (1) is screwed onto instrument panel (2) from rear

3 Remove lock cylinder (1) to side
4 Unhook control cable from eye (arrow) on lock cylinder (1)

NOTE: Installation: Check function of control cable, adjust with knurled nut if necessary

5 Install in opposite order.