AR68.20-P-2070M Remove/Install Front Floor Covering (Right)

AR68.20-P-2070M Remove/Install Front Floor Covering (Right)

Illustration On Model 220:

Removal, installation
1.1 Remove front seat
1.2 Move front seat back as far as possible
2 Remove cover below instrument panel (left)
3 Pull off door sill molding (2)

NOTE: Door sill molding fastened with 3 clips

4 Pull off edge guard (1) in lower area on A-pillar
5 Remove panel (4)

NOTE: Fastened with 2 clips in addition

6 Lift floor covering (8) at rear, remove at center console and then remove towards rear

NOTE: Installation: Insert floor covering (8) in area of center console (arrows)

7 Install in opposite order.