AR01.10-P-0010-01AV Connect Compression Tester

Connecting compression tester





1. Remove rubber profile (1).
2. Remove cover (2).
3. Remove panelling (3).
4. Remove control module box (4).





5. Disconnect connector (X3563) in control module box.
6. Connect adapter line (5) to pin 6 of connector (X35/63).
7. connect adapter line (5) with the compression test line.





8. Remove engine cover (6).





9. Pull off protective cap of terminal 30 (8) of generator (G2).
10. Connector terminal (A) of compression tester to terminal 30 (8) of generator (G2).

Make sure that the electrical line of terminal (A) of the compression tester does not get in contact with the exhaust manifold.