GF72.29-P-3005S Convenience Closing, Power Windows, Function

GF72.29-P-3005S Convenience Closing, Power Windows, Function

Function prerequisites
- Voltage not too low or too high and
- All doors closed (status: unlocked) and
- Ignition starter key in position "0" or removed and
- "Lock" button on remote control key (A8/1) pressed for longer than 1 s, ((USA)(J): key in "lock" position)

Function
The affected control modules (model 220: N69/1, N69/2, N69/3, N69/4; model 215: N69/1, N69/2 and N22/6) receive the signal/CAN message for convenience closing and then actuate the corresponding power window motors (M10/3, M10/4, M10/5, M10/6). The motors are actuated as long as the button on the remote control key is pressed, however, max. 25 s.

The power window convenience closing feature functions even when the windows are not synchronized.

The convenience closing feature is interrupted when
- the request via CAN bus is no longer received or
- blocking/pinching is recognized or
- the function prerequisites specified above are no longer fulfilled.

Moreover, when the convenience closing feature is triggered the sliding/pop-up roof is closed.