AR54.15-P-1258I Remove/Install Fuse and Relay Box In Engine Compartment at Right Front

AR54.15-P-1258I Remove/Install Fuse and Relay Box In Engine Compartment at Right Front

Shown On Model 220:

Removal, installation
1 Connect quiescent current retention unit
2 Disconnect ground lead from battery
3 Open engine hood and move to upright position
4 Release and remove cover (1) on left fuse box(F1)
5 Remove CFI control module (N3)
6 Remove right SAM control module (N10/7) with right front fuse and relay module (K40/7)
7 Remove ETC control module (N15/3)
8 Remove vent tube (3)
9 Pull wiring harnesses back to right fuse box (F1/1)
10 Unscrew screws (2) and remove fuse box

NOTE: Installation: Check seal on wire passage from fuse box/vehicle interior

11 Install in opposite order.