AH01.45-P-0001-01E Notes on Application of Sealing Compound to Oil Pan

Notes on application of sealing compound to oil pan





Application of sealing compound to upper part of oil pan

The line drawn in (F) identifies the course of the sealing compound.

The sealing compound must be only applied to the specified surfaces in the form of a bead of 2.0 mm - 0.5 mm in diameter.

The sealing compound must be processed within 10 minutes. The sealing compound bead must not be spread. Only the sealing compound listed may be used.





Application of sealing compound to bottom part of oil pan

The line drawn in (F) identifies the course of sealing compound.

The sealing compound must only be applied to the specified surfaces in the form of a bead of 2.0 mm - 0.5 mm in diameter.

The sealing compound must be processed within 10 minutes. The sealing compound bead must not be spread. Only the sealing compound listed may be used.