Engine Oil Level Indicator

Engine oil level indicator

Note: The vehicle must be horizontal for at least 5 minutes with the engine switched off at operating temperature. Otherwise measurement accuracy can be compromised.







- Image depicts 220 models

A1p13 Multifuntion display (models 215 and 220)

A1p13 Left multifuntion display (model 230)

S110s1 Scroll forward/back button

S110s3 System selection button

1. Switch on ignition

2. Press the system selection button (S110s3) repeatedly until the kilometer reading is displayed in the multifuntion display (A1p13).

3. Press the scroll back and forward button (S110s1) repeatedly until "CORRECT MEASUREMENT ONLY WHEN VEHICLE IS STATIONARY AND ON THE LEVEL" appears in the multifuntion display (A1p13). After 3 seconds "ENGINE OIL MEASUREMENT RUNNING" is displayed.

4. Refill the engine oil quantity shown in the multifuntion display (A1p13) and check the engine oil quantity again.

5. Switch off the ignition.