AR68.10-P-1520M Remove/Install Cover Below Instrument Panel (Right)

AR68.10-P-1520M Remove/Install Cover Below Instrument Panel (Right)





Remove/install
1 Remove cover (1) with catch lugs (2) out of knee protection (3) toward front and rear from both retaining brackets (arrows) on heater housing (6)

NOTE: Installation: Install both front catch lugs (arrows) for cover (1) into retaining bracket (arrows) on heater housing (6).

2 Unclip footwell illuminations from knee protection (3) and disconnect connector.
3 Unscrew screws (4)
4 Remove knee protection (3) with hooks (5), (4 each) downward out of instrument panel and simultaneously from center console.

CAUTION: Installation: Ensure that side guide lugs (arrow) of knee protection (3) are correctly installed in area of center console (arrow).

5 Install in reverse sequence.