Front Door Window Motor: Service and Repair

AR72.29-P-1860M Remove/Install Front Door Power Window Motor

1 Remove door lining from front door
2 Partially remove insulating mat from inner door panel

NOTE: From bottom to top until inner Torx screws (1) are visible

3 Disconnect left/right power window motor connector (M10/3x1, M10/4x1) from left/right front power window motor (M10/3, M10/4)
4 Unscrew Torx socket bolts (1)

- See "Special Tools" below.

CAUTION: Protect motor against falling down

- Bolt of motor of electric window lifter of front door: 5 Nm

5 Remove left/right power window motor (M10/3, M10/4) from power window and door

NOTE: Before installing grease gear on motor lightly

6 Install in the reverse order.

Special Tools

Front Door Window Motor: Service and Repair

Special Tools: