A/T - Limp Home Mode/Codes 2200/2201/2767/2768 Set
Date: October 31, 2008Order No.: S-B-27.50/59d
Supersedes: S-B-27.50/59c dated October 17, 2008
Group: 27.50
Revision History
SUBJECT:
Model 164.122/175/186
Model 171.454/456/473
Model 203.052/054/056
Model 209.356/375/456/475
Model 211.022/056/070/256
Model 215.375
Model 219.375
Model 220.170/175
Model 230.475
Model 251.122/165/175
Equipped with 7G-Tronic Trans.(NAG2), Serial Numbers Between 7229xx 00 327088 and 7229xx 00 338693
Transmission in Limp Home Mode with Fault Codes 2200, 2201, 2767 and 2768
If you receive customer reports in the above model vehicles of the transmission being in limp home mode with fault codes 2200, 2201, 2767 and 2768, the condition can be related to an unfavorable production tolerance of the speed sensor ring. To resolve, refer to the following applicable remedy.
For transmission serial numbers in the range of 7229xx 00 327088 and 7229xx 00 338693, replace the sensor ring. Refer to all of the relevant WIS documents for removal/replacement, disassembly/reassembly and filling of the automatic transmission.
For transmissions outside of the given production range, replace the electrohydraulic control module (valve body). Refer to WIS document AR27.19-P-0200w. Refer to EPC net for the applicable part number, being sure to regard the footnotes carefully.
Parts Information
NOTE:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on October 31, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty
Operation: Short test, perform (54-1011)
Automatic transmission (veh. With 722.9. trans.), R & R (27-2029)
Auto. trans. (722.6/722.9) - K1/K2/K3/B1/B2/B3/freewheel, D&A/replace
parts as required (transmission removed) (27-9999)
Electrohydraulic control unit for auto. trans. remove/install veh. with 722.9 trans (27-4989)
Control unit - software (after short test), install (54-0991)
Control unit - ....code (after short test), perform (54-0992)
Adaptation, perform (27-1047)
Oil level, automatic transmission, check correct (27-1255)