AR77.20-P-0500F Remove/Install Sliding/Pop-Up Roof Cover

AR77.20-P-0500F Remove/Install Sliding/Pop-Up Roof Cover
- with CODE (414a) Electric glass sliding/pop-up roof







1 Slide cover (2) to rear
2 Open sliding/pop-up roof approx. 10 cm
3 Remove trim strip (1)

NOTE: Before pulling off trim strip (1) press off on outside with plastic wedge.

4 Completely open sliding/pop-up roof
5 Push cover (2) forward, unhook sliders (3, 4) from slide rail and lift out cover

CAUTION: Press cover (2) to side while unhooking

6 Reinstall in opposite order.