Switching On Heated Seat

Function prerequisites:
- Terminal 15R ON or terminal 15 ON

Function
- Pressing the upper half of the button on the front left HS switch (N72/1s10) or front right HS switch (N72/1s11) switches on Stage 1 of the heated seats.
- Stage 1 is displayed by the right-hand LED illuminating in the switch.
- Pressing the lower half of the button on the N72/1s10 or the N72/1s11 switches the heated seats to Stage 2.
- Stage 1 is displayed by both LEDs being illuminated in the switch
- The upper control field control module (N72/1) regulates the power output to the heating elements in the seats depending on the selected heating stage.
- The heater element's resistance wire is heated by the flow of current through it.