GF82.10-P-3001B Position Lamp Control, Function

GF82.10-P-3001B Position Lamp Control, Function

MODEL 203 up to model year 08/YoM 07







Parking lights actuation, function
1 CAN interior
E1e3 Standing and parking lights
E2e3 Standing and parking lights
E3e2 Taillights and parking lights
E4e2 Taillights and parking lights
E6/1 Left front side marker lamp (United States of America)
E6/2 Right front side marker lamp (United States of America)
E6/3 Left rear side-marker lamp (United States of America)
E6/4 Right rear side-marker lamp (United States of America)
N10/1 Front SAM control unit with fuse and relay module
N10/2 Rear SAM control unit with fuse and relay module
N28/1 Trailer recognition control unit
S1 Light switch module
X58 Trailer hitch socket (13-pin)

Function sequence
The rotary light switch (S1s1) of the light switch module (S1) is set to the "left parking light ON" or "right parking light ON" position.

1 The front SAM control unit with fuse and relay module (N10/1) registers the applied position of the rotary light switch (S1s1).
2 The front SAM control unit with fuse and relay module (N10/1) actuates the parking light in the left and right lamp units (E1 and E2) and transmits the "left parking light ON" or "right parking light ON" signal at the same time over the CAN interior to the rear SAM control unit with fuse and relay module (N10/2).
3 The rear SAM control unit with fuse and relay module (N10/2) actuates the taillights and parking lights (E3e2 and E4e2).