GF82.10-P-3000B Standing Light Actuation, Function

GF82.10-P-3000B Standing Light Actuation, Function

MODEL 203 up to model year 08/YoM 07







Standing lights actuation, function
1 CAN interior
A1 Instrument cluster
A1h1 Warning buzzer
E1e3 Standing and parking lights
E2e3 Standing and parking lights
E3e2 Taillights and parking lights
E4e2 Taillights and parking lights
E6/1 Left front side marker lamp (United States of America)
E6/2 Right front side marker lamp (United States of America)
E6/3 Left rear side marker lamp (United States of America)
E6/4 Right rear side marker lamp (United States of America)
E19/1 Left license plate lamp
E19/2 Right license plate lamp
N10/1 Front SAM control unit with fuse and relay module
N10/2 Rear SAM control unit with fuse and relay module
N28/1 Trailer recognition control unit
N73 EIS [EZS] control unit
S1 Light switch module
S17/3 Left front door contact switch
X58 Trailer hitch socket (13-pin)

standing lights actuation function sequence
1 The rotary light switch (S1s1) of the light switch module (S1) is set to the "standing lights ON" position.
2 The front SAM control unit with fuse and relay module (N10/1) registers the applied position of the rotary light switch (S1s1).
3 The front SAM control unit with fuse and relay module (N10/1) actuates the standing lights in the left and right lamp units (E1 and E2) and transmits - at the same time - the "standing lights ON" signal over the CAN interior to the rear SAM control unit with fuse and relay module (N10/2).
4 The rear SAM control unit with fuse and relay module (N10/2) actuates the taillights and parking lights (E3e2 and E4e2) and the left and right license plate lamps (E19/1 and E19/2).

In addition to the standing lights, the left front side marker lamp (United States of America) and right front side marker lamp (United States of America) (E6/1 and E6/2) as well as the left rear side marker lamp (United States of America) and right rear side marker lamp (United States of America) (E6/3 and E6/4) are actuated.