Reset Service Indicator FSS (Illustrated)

Reset Service Indicator FSS (Illustrated)

Preliminary Procedures:
- Close trunk lid or liftgate as well as engine hood and doors.








1. Turn key in ignition switch to Position 2.

Steering Wheel - Version 1:

Steering Wheel - Version 2:

Early Model - Trip And Main Odometer Main-menus:

Late Model - Trip And Main Odometer Main-menus:

2. Press the Main Menu System selection buttons (-red arrows- located on the left-hand side of steering wheel) repeatedly to cycle through the various menus until the Trip Odometer/Main Odometer Menu, temperature, and time is displayed on the Multifunction Display.

Multifunction Display - Main Menus:

1 - Trip odometer and main odometer menu
2 - Audio Systems menu
3 - Navigation system menu
4 - Malfunction message memory menu
5 - Individual settings menu
6 - Trip computer menu
7 - Telephone menu

Steering Wheel - Version 1:

Steering Wheel - Version 2:

Early Model - FSS (Flexible Service System) Sub-menu:

Late Model - FSS (Flexible Service Sub-menu:

3. Press the Sub-menu System selection arrow buttons (-red arrow- located on the steering wheel) repeatedly to cycle through the various sub-menus until the FSS (Flexible Service System) sub-menu is displayed on the Multifunction Display.

Trip And Main Odometer Sub-Menus:

1 - Trip odometer and main odometer sub-menu
2 - Coolant Temperature gauge sub-menu
3 - Vehicle speed sub-menu if "SPEED DISP" is selected in the individual settings menu
4 - FSS (Flexible Service System) sub-menu
5 - Engine oil level indicator sub-menu

Early Model:

Late Model:

4. To enter reset mode, press the trip-odometer/instrument cluster illumination dimmer button (-red arrow- located on the lower left hand side of instrument cluster) until the message "DO YOU WANT TO RESET SERVICE INTERVAL?" "CONFIRM RESET USING RESET BUTTON" or "Service interval To reset: Press reset button for 3 sec." displays on the Multifunction Display. Release the trip-odometer/intrument cluster illumination dimmer button when message appears.

Early Model:

Late Model:

5. To confirm reset, press the trip-odometer/instrument cluster illumination dimmer button (-red arrow- located on the lower left hand side of instrument cluster) until "SERVICE INTERVAL HAS BEEN RESET" displays on the Multifunction Display. Release the trip-odometer/instrument cluster illumination dimmer button.


6. Multi-function display will now return back to the FSS (Flexible Service System) Sub-menu System with a new mileage interval. Turn ignition key to position 0, release ignition key.

NOTE:
If new mileage does not appear after reset. Turn key to position 0, release key and return back to Step 1.

7. Re-insert ignition key, turn key to position 2 and recheck work.