AR20.10-P-1271A Remove/Install Coolant Pump

Removing And Installing Engine Coolant Pump






1 Remove viscous fan clutch (1)
- Engines with viscous fan clutch

NOTE: Left-handed thread

2 Drain coolant
- Radiator and crankcase.

3 Disconnect coolant hoses (11, 12 and 32)
- Check condition of engine coolant hoses and hose clamps and replace if necessary.

4 Loosen combined bolts and washers (33a) on belt pulley (33)
5 Remove poly V-belt (2)
6 Unscrew and remove engine coolant pump belt pulley (33)
7 Unscrew and remove engine coolant pump (34)

NOTE:
- The engine coolant pump of engines 111.943/944/973/975 with compressor is extended by 29.5 mm
- Installation: Clean sealing surfaces. Engine coolant pumps which were originally sealed with liquid sealant can be sealed with liquid sealant or a paper gasket (35) in the case of repair.

8 Install in reverse order
9 Check cooling system for leaks.