Procedure
ProcedureA. Install New Camshaft Solenoid Adapter Harness (Model 203.747)
1. Install new adapter harness:
^ Remove cover over camshaft solenoid (B, Figure 1).
^ Disconnect camshaft solenoid connector (A, Figure 1) from camshaft solenoid (B)
^ Connect adapter harness between connector on camshaft solenoid (C, Figure 2) and engine harness
^ Secure adapter harness connector (A, Figure 2) to engine harness sheath (B) with cable tie (arrow).
Note:
Ensure cable tie (arrow) is secured to engine harness sheath (B) as shown otherwise wire chafing may occur.
2. Reinstall remaining components in reverse order.
B. Install New Camshaft Solenoid Adapter Harness (Model 170.449 With Vacuum Pump)
1. Install new adapter harness:
^ Remove cover over camshaft solenoid (A, Figure 3).
^ Disconnect engine harness connector (B, Figure 3) from camshaft solenoid (A).
^ Connect adapter harness (A, Figure 4) between connector on camshaft solenoid and engine harness (C).
^ Secure adapter harness connector (B, Figure 4) to existing engine harness sheath with cable tie (arrow).
Note:
Ensure cable tie (arrow) is secured to engine harness sheath as shown otherwise wire chafing may occur.
2. Reinstall remaining components in reverse order.
C. Install New Camshaft Solenoid Adapter Harness (Model 170.449)
1. Install new camshaft solenoid adapter harness:
^ Remove cover over camshaft solenoid (A, Figure 5)
^ Disconnect engine harness connector (B, Figure 5) from camshaft solenoid (A).
^ Connect camshaft solenoid adapter harness to connector on camshaft solenoid and to engine harness connector (C, Figure 6).
^ Secure adapter harness connector (A, Figure 6) to engine harness sheath (B, Figure 6) with cable tie (arrow).
Note:
Ensure cable tie (arrow, Figure 6) is secured to engine harness sheath (B, Figure 6) as shown otherwise wire chafing may occur.
2. Reinstall remaining components in reverse order.
D. Install New Camshaft Solenoid Adapter Harnesses (Models 203.040/740)
1. Install new camshaft solenoid adapter harnesses:
^ Remove cover over camshaft solenoids (A, Figure 7)
^ Disconnect engine harness connectors (B, Figure 7) from camshaft solenoids (A).
3. Install camshaft solenoid adapter harnesses (B, Figure 8):
Connect adapter harnesses (B) between connector on camshaft solenoid (A) and engine harness. Secure adapter cable (B, Figure 8) to engine with cable ties (arrows).
Note:
Ensure cable ties (arrows) are secured to engine as shown otherwise cover will not properly fit over camshaft solenoids (A) and wire chafing may occur.