AR77.20-P-3014PB Remove/Install Sun Blind Motor on Sliding/Pop-Up Roof

Removing And Installing Sun Blind Motor On Sliding/Pop-up Roof







1 Move sliding/pop-up roof to zero position

NOTE: Sliding/pop-up roof should be closed and sun blind in package position

2 Remove and install headliner
3 Unscrew mounting screws M24 (2)

NOTE: Installation: Screw in screws uniformly.

Screw on sliding roof drive
TORX - 4 N.m
Hexagon socket - 4 N.m

4 Remove sun blind drive unit (M24)
5 Install in the reverse order
6 Synchronize sliding/pop-up roof