AR77.20-P-3010PB Remove/Install Tilting/Sliding Roof Motor

Removing And Installing Tilting/Sliding Roof Motor







1 Move sliding/pop-up roof to zero position

NOTE: The sliding/pop-up roof should be closed and the sun blind in the package position

2 Remove and install headliner
3 Unscrew mounting screws M12 (1)

NOTE: Installation: Screw in screws uniformly.

Screw on sliding roof drive
TORX - 4 N.m
Hexagon socket - 4 N.m

4 Remove roof system power unit (M12)
5 Install in the reverse order
6 Synchronize sliding/pop-up roof