AR77.21-P-0800-04PB Install Panoramic Roof Frame

AR77.21-P-0800-04PB Install Panoramic Roof Frame







129 589 03 21 00, Feeler gauge







1. Remove protective foil from rubber spacers.

2. Center panoramic roof frame above body opening, lower at rear and align to strips of tape to coincide.
Aid of 2 helpers required.

3. Install panoramic roof frame on glue bead.
4. Check whether body opening is aligned correctly; correct if necessary.
5. Uniformly press on panoramic roof frame all-round.
6. Check height adjustment of rear glass roof in relation to rear-end door; correct if necessary.

7. Check transition between front glass roof and windshield; correct if necessary.
If transition is not correct, molding cannot be installed on windshield.
Do not move vehicle before glue is sufficiently dry (approx. 1 h); otherwise, strength of glue is not ensured.