Convenience Closing of Panoramic Sliding Roof

Networking Of Components:

Function requirements
- No overvoltage/undervoltage
- All doors closed (state: locked) and
- Ignition key in "0" position or removed and
- "Lock" button on transmitter key (A8/1) pressed and held


Function
The transmitter key (A8/1) sends an infrared signal to the left front IR receiver (A26/1) or the right front IR receiver (A26/2). The overhead control panel control module (N70) receives the request for convenience closing via CAN and actuates the roof system motor (M12m1) in the "close panoramic sliding roof" direction.

The motor remains actuated for as long as the "Lock" button on the transmitter key (A8/1) is pressed.

The convenience closing function of the panoramic sliding roof aborted if
- The request is no longer received via CAN, or
- The function requirements listed above are no longer satisfied.


NOTE: The convenience closing function also closes the windows, the sun blinds and the panoramic sliding roof.