AR68.30-P-4305-10P Install IRS Wiring Harness In Headliner

AR68.30-P-4305-10P Install IRS Wiring Harness In Headliner







Illustrated on model 203.0 with code (543) sun visors with illuminated mirrors







1 Headliner
2 IRS wiring harness
3 Main wiring harness
A26/14 Interior motion sensor transmitter and receiver

1. Connect new IRS wiring harness (2) to interior protection system transmitter/receiver (A26/14) and arrest interior protection system transmitter/receiver (A26/14) in installation frame.
2. Route new IRS wiring harness (2) on new headliner (1) and glue to new headliner (1) with approx. 10 cm long strip of adhesive tape crossways at an interval of approx. 10 cm.

Do not cross main wiring harness (3) with new IRS wiring harness (2) and press strips of adhesive tape on sufficiently, otherwise a short circuit can result from chafing on the roof paneling.

The old headliner (1) serves as a guide for routing the wiring harness.