Fuel Door Release Actuator: Service and Repair

AR80.20-P-2300P Remove/Install Fuel Filler Flap Central Locking Motor

Shown On Model 203.0:

1.1 Remove audio power amplifier
1.2 Remove trunk lining on right
1.3 Remove paneling in rear
3 Remove right side paneling
2 Loosen bolts (1)
3.1 Remove bracket (2) with fuel filler flap CL [ZV] motor (M14/10)

NOTE: Installation: Feel guide duct and insert locking bolt of fuel filler flap CL [ZV] motor (M14/10) into guide duct.
- Guide (6) on bracket (2) should be visible in body opening.

3.2 Remove fuel filler flap central locking actuating motor (M14/10).

NOTE: Installation: Feel guide duct and insert locking bolt of fuel filler flap CL [ZV] motor (M14/10) into guide duct.

4 Disconnect connector (5)
5 Remove bolts (4)
6 Remove fuel filler flap CL [ZV] motor (M14/10) from bracket (2)
7 Install in the reverse order