AR54.65-P-0002P Remove/Install Parktronic System (PTS) Sensors In Rear Bumper

AR54.65-P-0002P Remove/Install Parktronic System (PTS) Sensors In Rear Bumper
- with CODE (220) Parktronic system (PTS)

Shown On Model 203.0:

1 Remove ram strip (1) from rear bumper
2 Unlock connector (3) and disconnect

NOTE: Gently lift locking tab (3a) using screwdriver.

3 Release locks (2) in direction of arrow

See "Special Tool" given below

4 Remove PTS sensor unit (rear bumper) (A43) from bracket

CAUTION: Installation: Check sealing ring (4) and replace if damaged.

NOTE: In direction of arrow.

5 Install in the reverse order


Special Tool

Unlocking Tool, P/N 168 589 02 31 00: