AR54.65-P-0001P Remove/Install Parktronic System (PTS) Sensors In Front Bumper
AR54.65-P-0001P Remove/Install Parktronic System (PTS) Sensors In Front Bumper
- with CODE (220) Parktronic system (PTS)
Shown On Model 203.0:
1 Remove ram strip (1) from front bumper
NOTE: In direction of arrow
2 Unlock connector (3) and disconnect
NOTE: Gently lift locking tab (3a) using screwdriver
3 Release locks (2) in direction of arrow
See "Special Tools" given below.
4 Remove PTS sensor unit (front bumper) (A42) from bracket
CAUTION: Installation: Check sealing ring (4) and replace if damaged.
NOTE: In direction of arrow.
5 Install in the reverse order
Special Tools