Test 2: Test Current Consumption of Component Y58/4 (Activated Charcoal Canister Shut-Off Valve)

Test current consumption of component Y58/4 (Activated charcoal canister shut-off valve)

Test sequence
- Switch off ignition.
- Connect socket box to component N3/10 (ME-SFI control module).
- (5.5) 5<-->88 (4.3)
- Switch on ignition.

Specified value:
- Amperage [0.5...1.0] A

Question: Is the measured value okay?

No
- The measured value is not o.k.
Possible cause and remedy
- Voltage supply to component Y58/4 (Activated charcoal canister shut-off valve)
- Inspect cables from component N3/10 (ME-SFI control module) to component Y58/4 (Activated charcoal canister shut-off valve).
- Y58/4 (Activated charcoal canister shut-off valve)
**End of test**

Yes
- The measured value is o.k.
**End of test**