A. Installation Preparation - All Configurations

1. Read this bulletin in its entirety before starting.

2. Unpack and compare the installation kit(s) contents against the Parts Information list in this bulletin.

3. Place the operating guides/client accessories (i.e. chargers, cassette tapes, CD's, etc.) in the glove box or appropriate storage compartment.

4. Remove the trunk mat.

5. Open and remove the right rear compartment cover.

6. Remove the three screws securing the sound system bracket, disconnect the sound system amplifier connector, and remove the assembly.

7. Determine the number and sequence of the D2B components to be installed, then locate and configure all fiber optic cables for the configuration.

Note:
Refer to S-SI-82.64/135, D2B Fiber Optic Configuration and Version Coding for proper D2B fiber handling procedures.

8. Proceed to:

^ Section B for telephone installation.

^ Section G for CD changer installation.